Electronics

Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr SRM Mount for a clean, flush look that places your SRM Head Unit exactly where you want it. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for SRM head unit - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

Ensure your computer stays properly in place.

Features
- Replacement adapter for the Insta-Mount system
- Universal mount permanently attaches to the back of your phone or other device
- Use with Bontrager Trip mount for seamless Blendr capability

Cadence Magnet for all CatEye computers that record cadence.

Wheel magnet for all CatEye cycle computers

For proper assembly.

Features
- For use with Shimano Centerlock rotor
- Including M4 x 16mm bolt

Mounts to the Knock Block frame chip display tabs on Rail Gen 2 to mount the Bosch Kiox display behind the stem to keep your cockpit spotless.

Features
- Not Bosch Smart System compatible
- Designed for Rail Gen 2 frames
- Refer to Service Manual for assembly instructions and service

Keep your computer and sensors ready for every ride with replacement batteries Key features: - CR2032 battery is used for most Trek and Bontrager computers - 23AE battery is used for the Bontrager Interchange Analog Wireless Sensor - LR44 and L1154 batteries are identical and used in Bontrager SpeedTrap Sensor

Replacement chainstay cover for DuoTrap S Digital Sensor

Foam pads to help reduce movement of the battery inside a RIB cavity.

Features
- Compatible with all RIB equipped models
- Refer to Service Manual for assembly instructions and service

Pro Blendr is the ultimate computer integration system for clean and easy installation directly to Knock Block. - Start with a Knock Block equipped frame using the appropriate frame chip with display tabs, and finish with Pro Blendr Knock Block Computer Mount for secure mounting of computers behind the stem to keep your cockpit spotless. - In addition to the correct frame chip with display tabs, don't forget your Garmin or Wahoo Adapter Puck! These are sold separately so you can build the ultimate Blendr system that's right for you.

Replacement chainstay cover for DuoTrap S Digital Sensor

See and be seen with original equipment lighting accessories. Ensure your lights are always ready to go when you are with this fast-charge USB cable. PRODUCT DETAILS - USB-to-USB-C cable to recharge your Bontrager lights - Compatible with most other USB-C devices - Quick charge - 230mm long

- Quick Charge USB-to-Micro-USB cable to charge your rechargeable Bontrager lights - Also able to charge most other Micro USB systems - 9 inches/23cm long

The K-EDGE co-polymer insert for Garmin 1/4 Turn style computers is a replaceable item. While it is extremely strong, we designed this insert to fail on a significant impact before the tabs on the back of the Garmin break. - Qty 1 – K-EDGE Co-polymer Insert for Garmin 1/4 Computer (Part No. K13-503) - Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws

Replacement plastic insert kit for K-EDGE Wahoo Mounts. The co-polymer insert for Wahoo 1/4-turn style computers is a replaceable item. While it is extremely strong, it is designed to fail on a significant impact before the tabs on the back of the Wahoo break. Attributes (specs): – Qty 1 – K-EDGE Co-polymer Insert for Wahoo 1/4 Computer (Part No. K13-1604) – Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws

Original replacement battery holder for your Domane MKIV.

Features
- For use with Shimano internal Di2 battery
- For installing a Di2 battery in your bike's seat tube
- Integrates seamlessly with the frame

Train smarter by connecting heart and smart phone or computer, all from a comfortable wearable with an easy-on washable strap. Key features: - Washable heart rate strap comfortably conforms to body - ANT+ 2.4 GHz and Bluetooth Smart wireless digital heart rate sensor - ANT+ and Bluetooth Smart allow simultaneous use of Trip 300 and smartphone - For use with all ANT+ and Bluetooth Smart wireless technology enabled devices - Includes washable softstrap, heart rate sensor, and CR2032 battery - Visit thisisant.com for a complete list of compatible devices - Visit bluetooth.com for a complete list of compatible devices - Not for underwater use

Get your computer dialed with the perfect magnet Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride. - Universal crank magnets sized for your bike and sensor - Compatible with all cadence sensors

Get your computer dialed with the perfect magnet Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride. - Universal crank magnets sized for your bike and sensor - Compatible with all cadence sensors

The adapter puck is required for mounting Garmin head units to the Pro Blendr Alloy Computer Mount. - Start with a Blendr stem, add the appropriate base, and finish with Pro Blendr Alloy Computer Mount and Garmin Adapter Puck for secure mounting of your Garmin head unit. Blendr is an elegant, integrated accessory mounting solution - For use with Garmin head units and Pro Blendr Alloy Computer Mount - Removable design alloys quick and easy adapter puck replacement - Attach your Garmin tether for an additional layer of security

Start with a Blendr stem, add the appropriate base, and finish with Pro Blendr Alloy Computer Mount and Wahoo Adapter Puck for secure mounting of your Wahoo head unit.

Features
- Blendr is an elegant, integrated accessory mounting solution
- For use with Wahoo head units and Pro Blendr Alloy Computer Mount
- Removable design alloys quick and easy adapter puck replacement

Ensure your Bontrager cycling computer properly stays in place.

Features
- Compatible with RIDEtime, Trip 100, 200 and 300 computers
- One size fits all

This tool is a must-have item for every service center. Essential for diagnosing e-bike systems. PRODUCT DETAILS - Gold-plated connectors for optimal signal clarity - Protective shielding that protects against noise - 2 meters in length - USB-A to USB-C connections - USB 3.1 data transfer cable

Features
- Hammerhead Quarter Turn Adapter For Karoo, Converts The Hammerhead Mounting System To Work With Quarter-Turn Mounts
- SRAM Model ID: AC-CM-QTRH-A1

Easily integrated Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras. - Quickly mount rear light to the back of your Bontrager Circuit MIPS road bike helmet - Tested with an accelerometer for intended breakaway point if involved in a crash

Light up the road Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Universal Ion Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen. - Blendr is an elegant, integrated accessory mounting solution - Clip can be rotated for compatibility with many Bontrager accessories - Works with any Blendr-compatible stem and the accompanying base

Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Trip Computer Mount for a clean, flush look that securely holds your Bontrager Trip computer in a perfect position to see on the go. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Insta-Mount or Trip Computer - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

The right parts for the right bike.

Features
- Compatible with Carbon and Aluminum
- Refer to Service Manual for assembly instructions and service

Original replacement charge port for your Bosch Smart system

Features
- Compatible with Bosch Smart System
- Check the service part lists for bike compatibility
- Assembly hardware available separately

Use a smaller battery in your 750Wh or 625Wh RIB battery slot.

Features
- For use with Bosch Smart System batteries only
- Used in 750Wh battery slots with 625Wh batteries
- Used in 625Wh battery slots with 500Wh batteries
- Not for use in 750Wh battery slots with 500Wh batteries
- Hardware is not included
- Refer to Service Manual for assembly instructions and service