Make Every Escapade a Grand Slam Take your bike outings from mediocre to unforgettable with the Grand Slam 3-bike hitch rack. This simple hanging hitch rack sports essential, no-fuss features, including a base that tilts for hatch access, arms that fold for quick storage, and straight-forward assembly. Constructed from American-made steel, the Grand Slam is secure enough to transport a team of bikes to any destination. - Carries 3 bikes (35 lb./bike) - A Bike Beam may be required for frames without a horizontal top tube. - Hanging hitch rack tilts away for hatch access when unloaded. - Ratcheting bike hold downs accommodate a variety of bike sizes and frame types. - Arms fold up and down with ease for quick storage and easy loading. - American-made steel construction. - Fits 1.25" or 2" hitch receiver.
Kuat's Dirtbag may not be the prettiest thing out there, but it's strong, dependable, and mounts just about anywhere. Just bolt this little guy up to a solid surface, then remove your front wheel, thread in your 15mm through axle, and you're all set. This mount fits most 15 x 142mm fat bike forks.
If you’re looking for a car rack that will haul your favorite 2-wheeled possessions with swagger and security, the Bones Hitch 3-bike has you covered. With arching lines and robust, American-made materials this hitch rack can be summarized in two words: beautiful simplicity. Weighing in at only 16 pounds, this 3-bike hitch rack is a full 25% lighter than similar racks—et just as strong. With integrated anti-sways and hold downs, the Bones Hitch is a fully functional piece of art. - Carries 3 bikes (35 pounds/bike). - Preassembled. - Injection-molded arms are strongest in the market. - Arms fold up and down with ease for quick storage and easy loading. - Welded steel mainframe. - Rack tilts down with pull of handle for easy access to rear of vehicle. - Coated hold-downs and anti-sway straps provide soft-touch protection to secure and stabilize the bikes. - Fits 1-¼-inch or 2-inch hitches. - Hitch lock sold separately (Model 3022). - Lightweight, steel construction weighs only 16 pounds. - Made in Madison, WI.
An RV compatible 2" hitch base for use with any SuperClamp 2-bike hitch rack. - Make your existing SuperClamp 2-bike hitch rack RV compatible (Class A, B, & C Motorhome). - A 2-inch base compatible with all SuperClamp 2-bike hitch racks (4025, 4025C, 4025F, 4026F). - For use with 2" receivers only. - Hitch pin and hardware sold separately.
Kuat's lock comes with a burlap bag, dust cap, two keys, and a Küat keychain bottle opener. 3/8" pin is for their 1.25" racks and the 1/2" pin is for their 2" racks.
Kuat's Transfer 2 offers all the Kuat quality you'd expect at a price that appeals to privateer racers and weekend riders alike. It fits both 1.25 and 2-inch trailer hitches and its stout steel construction won't leave you hanging, or your precious cargo bouncing around on the road. Bikes mount securely and easily with an adjustable locking arm and wheel tray. Best of all, there's no contact with the frame so your bike will come off the rack looking just as good as when you put it on. The wheel trays hold up to a four-inch-wide tire and the rack holds bikes with wheels anywhere from 20 to 29 inches.
Saris' Locking Hitch Tite adds both stability and security to your hitch rack. It tightens up the interface between your rack and hitch to combat swaying and it locks your rack to your vehicle. It fits 1-1/4 and 2-inch threaded hitch-tites and is compatible with the 200/500 Series T-Rax, all Thelma racks, standard-model Cycle-Ons, and all the T-Bones racks (each sold separately).
A fork hitch for bike transportation that allows for versitle mounting options on any flat surface. - Pre-aligned positioning for easier fork installation - Remove Boost 15 x 110mm insert to accommodate 20mm axles - Easy mounting to any flat surface - Rust-free Aluminum construction - The platform is 3.75 x 1.5" and the holes are 3" center to center Compatible with following: 15 x 110 mm (Boost, silver insert) 15 x 135 mm (Borealis, Fatback, 9zero7 + other Fat Bike forks) 15 x 142 mm (Salsa + others) 15 x 150 mm (Rock Shox Bluto Fork + others) 20 x 110 mm
The HUSKE (HUb Standards Keep Evolving) is a universal fork mount that handles the most common fork mount standards of today and tomorrow. Interchangeable plugs (sold separately) are available for 9x100mm Quick Release, 12x100mm Thru-Axle, 15mmx100 Thru-Axle, and 15mmx110 Thru-Axle (Boost), with more sizes to come in the near future. The HUSKE comes standard on all SeaSucker 2019 racks (the following SeaSucker fork-mount racks can be upgraded: Talon, Mini Bomber, Bomber, and Falcon).
- Updated design, for use with all Saris racks where bikes are secured by the top tube - Bridges the gap from stem to seat tube, creating a virtual top tube - Useful on ladies and specialty frames
Don’t waste your weekend! Go explore with Saris’ Bike Porter Trunk 3-Bike rack. It’s outfitted with adjustable features to fit a vast variety of vehicles. Constructed of sturdy, durable steel, the rack’s frame has 15 different easy-to-adjust positions. It’s held in place by foam-padded legs and four straps, each with a smartly coated hook to protect your car’s finish. The bikes are held down with ratcheting, anti-sway straps and rest in protective, grooved rubber cradles, which allow the shift cables to slot down underneath and away from the top tube.
Kuat Racks Phat Bike Kit. This item includes the strap extender for the rear tire strap and a secondary Velcro strap for the front tire.
Saris' Wheel Straps keep your front wheels from spinning and your handlebars from turning in the wind. They're made of tough nylon with easy-to-use buckle closures. Wheel Straps are sold in pairs.
Saris' Trap Fork Mount can be bolted anywhere you need to hold a bike. It secures your bike's fork dropouts with a stout 9-mm quick-release skewer. The Trap is made of powder-coated, light, durable aluminum. A hole in its body allows your bike to be locked with a cable (sold separately).
Transport all types of bikes with Saris’ Freedom 2-Bike hitch rack. Its innovative design adjusts to fit most bikes and sizes, including kids’ and even some recumbents, thanks to the adjustability of its center upright support. It uses quick-adjust trays and ratcheting straps to secure two bikes of up to 35 pounds each, and loading is made easy by the low tray height. The center upright support even tilts down to allow trunk access. Plus, the rack itself only weighs 21 pounds, making it easy to take on and off.
Want all the innovations of our revolutionary Glide rack, but only need to transport a couple of rides? This 2-bike hanging hitch rack has you covered. The Glide EX 2-bike features the same noteworthy and one-handed glide action of its Glide brethren, plus a beefed-up bike spec: the ability to carry 50 lb per bike. Yep, that's right - this hanging hitch bike rack is eBike compatible. Simply push the trigger to release the rack, glide away and boom – hatch access. When you’re done, the same amount of (non) effort glides the rack upright and you’re good to go. It’s the same one-button, one-step, one-motion movement for when the hitch rack is fully loaded and when it’s not. Product Features - eBike Friendly: this hanging hitch bike rack transports 2-bikes, up to 50 lb each. - Convenient, one-step access to the back of the car - fully loaded with bikes or not. - Innovative four-bar linkage system controls the center of mass, creating a smooth, glide-action away from the vehicle. - Complete integrated security: locks the rack to the car and the bikes to the rack. - Hanging hitch style bike rack. - Carries 2 bikes, up to 50 lb. each. - One-button glide action provides instant access to rear of vehicle, both with bikes loaded and without. - No assembly needed. - Rack weight: 37 lb. - Bike hold downs are easy to use and quick to load. - Best-in-class ratchet straps speedily fasten bike to the rack. - Integrated locking cable secures bikes to the rack. - Locking hitch pin secures rack to the car. - Universal hitch: fits 1 ¼” and 2” hitches out of the box. For use with receiver hitches Class II or higher. - Built and tested to outlive the elements.
The only thing left to do is answer. No matter where the call beckons, the MTR can get you and your ride there. Designed with versatility at its core, the MTR (aka: modular tray rack) can transport a variety of bikes and can be easily customizable with add-on trays to bring your whole collection of shredders or ride-share with friends. Each MTR rack is built from American-made steel and aluminum for maximum durability. Roomy wheel trays swallow bike tires up to 5 inches wide for a stable hold, while dual-arm wheel holders keep bikes locked in position – and keep the paint chip-free. It’s all built on a rugged hitch-based foundation that can be tilted away, when fully loaded with bikes and without, for fast and easy vehicle access – because after all, those snacks aren’t going to pass themselves. Plus, the MTR’s nesting bike trays make for easy-on, easy-off loading. No more lifting bikes over the rack – simply flip the trays out of the way as needed to get you from parking lot to trailhead in record time. The Saris MTR also available in a 1-Bike version. Product Features - Modular: carries 2 bikes, up to 60 lbs, and can be customized with Add-On to transport up to four bikes. - Pivot away: unique wheel trays pivot and nest for easy loading and compact storage. - Dual-arm holders are compatible with a wide range of tire sizes, and never touch the bike's frame. - Full Tilt: tilting mechanism for easy hatch access. - Complete Integrated Security: locks the rack to the car and the bikes to the rack. - Designed to be used with 2" hitch receivers only. - Tray-style hitch bike rack - Carries 2 bikes, up to 60 lb. each - Customizable to carry more bikes with 1-Bike Add-On and 2-Bike Add-On - No assembly needed - Rack folds up for compact storage when not in use. - Tool-free installation - Rack weight: 55 lb - Adjustable wheel block to accommodate wheel sizes from 20 inches up to 29 inches and tire sizes as wide as 5 inches - Integrated locking cable secures bikes to the rack - Locking hitch pin secures rack to the car - Accommodates wheel bases up to 53 inches - 2" hitch compatible - Constructed from American-made aluminum and steel, and tested to outlive the elements
Secure peace of mind and your trunk rack to vehicle with our Trunk Rack Lock. - Secure bike rack to vehicle to deter theft. - Cables secured within closed trunk. - Includes 8 ft. cable. - Includes 2 keys.
Built for the RV Life, Made for Anyone Whether you're an RV full timer, enthusiast or someone with a 2" receiver, the SuperClamp HD has your bike transport covered. This heavy-duty hitch rack features all the same specs as our top-selling SuperClamp EX, including dual wheel-clamping hooks, tilting capabilities and light-grabbing reflectors, all built on a dedicated 2" receiver base. Proven to stand up to miles on the road, this RV compatible hitch rack is as rugged as they come. Life with the RV just got a little better. - Carries 2 bikes, up to 60 lb/each. - This rack fits a wheelbase of up to 50". - Compatible with bike tires up to 4".
Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.
Previous page Page 2 of 2